Brick City Boiler
(973) 275-8278 Contact Us
  • Home
  • /Boiler Repair and Heating Services in Newark

Boiler Repair and Heating Services in Newark


From a cold radiator in Vailsburg to a leaking boiler in a Downtown Newark brownstone, these are the services Newark asks us for by name. Each job starts with diagnostics and a written plan, so you know what boiler work is needed before we begin. Below is the full lineup. If your heat is out now, call us now and tell us what the boiler is doing.

Quick Answer

Brick City Boiler's Newark services cover the full heating lineup: emergency repair, installation, replacement, maintenance, radiator work, heating controls, gas boiler service, commercial service, safety inspections, and steam boiler work. Every job starts with diagnostics and a written plan, so you know what is needed before work begins. If your heat is out now, describe what the boiler is doing and the team will point you to the right service.

Experienced Boiler Specialists
Local Team Newark, NJ Based
24/7 Emergency Rapid Response
Warranty Backed Workmanship Guaranteed in Newark

Full Heating Services Across Newark

From a cold radiator in Vailsburg to a leaking boiler in a Downtown Newark brownstone, these are the services Newark asks us for by name. Each job starts with diagnostics and a written plan, so you know what boiler work is needed before we begin. Below is the full lineup. If your heat is out now, call us now and tell us what the boiler is doing.

Heating technician on the job

Emergency Boiler Repair

No heat at 2 a.m. in January is an emergency, full stop. Our emergency boiler repair line covers Newark and nearby Essex County towns when the boiler quits, locks out, or starts leaking. We diagnose on the spot, lay out the work and the plan in writing before starting, and carry common parts like igniters, relief valves, and thermostats so most calls end with heat restored the same visit.

View Details
Close-up view of an industrial plumbing system featuring a pressure gauge and steel pipes.

Boiler Installation

Replacing a dead boiler or fitting heat to a newly renovated space starts with proper sizing. We calculate heat load from your home's size, insulation, and radiator count, then install the right steam or hot-water unit for the job. Every boiler installation includes new near-boiler piping as needed, system flushing, combustion testing, and a walkthrough of the controls before we leave.

View Details
Newly installed modern boiler with copper piping in a basement

Boiler Replacement

When repair after repair starts adding up past the sense of replacing the boiler, we say so plainly. Boiler replacement makes sense for cracked heat exchangers, obsolete parts, or units so inefficient they spike your gas bill every winter. We remove the old unit, set the new boiler, reconnect piping and venting to current code, and test-fire the system. You get the old unit hauled away and the new one explained.

View Details
Technician inspects and repairs a heating system in an industrial workshop setting.

Boiler Maintenance & Tune-Ups

A yearly tune-up is the best protection against a midwinter breakdown there is. Our boiler maintenance visit covers burner cleaning and adjustment, flue and vent inspection, pressure and water-level checks, safety control testing, and lubrication of moving parts. Newark's hard water and older systems make this visit matter more here than in newer suburbs. Schedule it in early fall, before the first cold snap fills every tech's calendar.

View Details
Cast iron radiator in a Newark home

Radiator Repair & Installation

Cold spots, clanking, and radiators that never quite warm up usually trace back to trapped air, stuck valves, or sludge in the lines. We bleed and balance radiators, replace thermostatic valves, and repitch steam radiators so condensate drains properly. Adding radiators to a finished attic or extension? We size and pipe them into your existing boiler system without tearing the house apart.

View Details
Close-up of hand adjusting radiator thermostat to control home heating temperature.

Thermostat & Heating Controls

A boiler is only as smart as its controls. We install and troubleshoot programmable and smart thermostats, aquastats, pressuretrols, and zone valves so each part of the house holds the temperature you set. If your boiler short-cycles or rooms overshoot by five degrees, the fix is often in the controls, not the boiler itself. Most control upgrades finish in under two hours.

View Details
Technician tightening a leaking copper boiler pipe joint with a wrench

Boiler Leak & Pipe Repair

Puddles under the boiler, weeping valves, and hissing steam leaks only get worse. We find the source, whether it is a failed gasket, a cracked section, corroded near-boiler piping, or a relief valve doing its job too often. Small leaks get sealed or re-piped during the repair visit. Bigger repiping jobs start with the full scope agreed in writing, and we pressure-test everything before firing the boiler up.

View Details
Close-up of industrial factory pipes and metal structures creating a complex machinery scene.

Commercial Boiler Services

Apartment buildings, storefronts, and houses of worship around Newark run bigger boilers with bigger consequences when they fail. Our commercial boiler services cover scheduled maintenance, burner and control repairs, and seasonal startup and shutdown for multi-unit and commercial properties. We document every visit, flag parts nearing end of life, and coordinate around your tenants' and business hours.

View Details
Boiler pressure gauge close-up

Annual Boiler Safety Inspection

Once a year, your boiler deserves a safety once-over. Our annual boiler safety inspection tests the pressure relief valve, low-water cutoff, flue draft, and gas connections, and checks for carbon monoxide at the draft hood and nearby. You get a written checklist of pass, monitor, or fix for every item. It is the visit that catches the problems before they become January emergencies.

View Details
A detailed image showing a gas stove burner with a pot above, highlighting kitchen heat and flame.

Gas Boiler Services

Gas-fired boilers need a tech who respects the fuel. Our gas boiler services include burner cleaning and tuning, gas pressure checks, thermocouple and igniter replacement, and venting inspection for safe exhaust. If you smell gas near the boiler, leave the area and call your gas utility first, then call us. For everything else gas-related, from pilot issues to conversions, we handle it start to finish.

View Details
Technician hands adjusting a steam boiler system in Newark

Steam Boiler Repair

One-pipe and two-pipe steam systems diagnosed properly: water hammer, cold radiators, surging water lines, and leaking vents across Newark and Essex County.

View Details
Steam boiler with pipes and cast iron radiator in a basement

Steam Boiler Installation & Replacement

Steam replacements sized to the building's radiation with proper near-boiler piping, Hartford loop, skimming, and full startup testing.

View Details
Technician cleaning a steam boiler component during maintenance

Steam Boiler Maintenance

Annual steam service: low-water cutoff testing, water line checks, skimming, vent inspection, and combustion tuning for quiet, even heat.

View Details

How a Service Call Works, Step by Step

No guesswork, no pressure. Here is exactly what happens from the moment you reach out to the moment heat is back on, so you always know where things stand. Most visits follow these four steps, whether it is a midnight no-heat call or a planned fall tune-up. You approve everything before we begin.

01

Request Service

Call us and tell us what the boiler is doing: no heat, strange noises, leaks, or an annual tune-up. Describe the system if you can, gas or oil, steam or hot water, and how old it is. We confirm the request and schedule the visit, with no-heat calls moved to the front of the line.

02

Diagnostic Visit

The tech arrives, listens to what you have noticed, then tests the system top to bottom: combustion, pressure, water level, controls, and venting. Most diagnostics take 30 to 60 minutes. We explain what failed, why it failed, and whether repair or replacement makes more sense for your situation.

03

Written Plan

You get the full scope in writing before any repair begins, parts and labor itemized, work agreed upfront. If the fix is not the sensible move, we will tell you that too and lay out the replacement option separately. You decide with the full picture in front of you, never under pressure.

04

Repair and Test

We complete the repair, then fire the boiler and verify everything: steady pressure, clean combustion, working controls, and even heat reaching the radiators. The work area gets cleaned up, and we walk you through what was done and what to watch for. Heat back on, problem solved, paperwork in hand.

Call (973) 275-8278

Why Newark Homeowners Choose Brick City Boiler

Three things set how we work apart, and none of them are slogans. They are habits you can verify on every single visit, starting with the first diagnostic. If any of them ever slip, we want to hear about it. That is the whole pitch: show up, diagnose honestly, fix it right.

  • Clear Plans Before Any Work Nobody should approve a repair blind. After diagnostics, we hand you a written plan with parts and labor itemized and the scope fixed. The plan we agree on is the plan we follow, even if the job takes longer than expected. If we find something additional mid-repair, we stop, explain, and get your approval before continuing. No surprises, ever.
  • Steam and Hot-Water Specialists Newark's housing stock runs on boilers, and most of them are steam or cast-iron hot-water systems older than their owners. We work on these systems every day: one-pipe and two-pipe steam, baseboard hot water, and radiant loops. That focus means faster diagnostics, parts on the truck, and repairs matched to how your specific system actually behaves.
  • Ready Before Newark Winters Hit October is the smart month for boiler work in New Jersey, and our schedule fills as temperatures drop. We prioritize no-heat calls first, keep common parts stocked through heating season, and answer with a real plan, not a vague window. When the first deep freeze hits Essex County, our customers' boilers are already serviced, tested, and ready.
Technician in work jacket and gloves servicing a wall-mounted boiler in a workshop

No Heat? Choose the Service You Need

Call us and tell us what your boiler is doing, and we will respond with clear next steps. Every job starts with diagnostics and a written plan, so everything is approved before work begins. Heat restored right, the first time.

Request Service

Get in Touch About Any Heating Service

The fastest way to reach Brick City Boiler is a quick call. Tell us what your boiler is doing, no heat, noise, leaks, or just due for a tune-up, and where in Newark or Essex County you are, and we will take it from there.

1

You call

Tell us what the boiler is doing and where you are. We will ask a few quick questions.

2

We diagnose

A technician finds the real problem: tested, not guessed.

3

You get it in writing

The full scope and plan in writing before any work starts. No surprises, ever.

Brick City Boiler


  • Address

    Newark, New Jersey

  • Visit Us

    53 Irvine Turner Blvd, Newark, NJ 07103, USA

Frequently Asked Questions

What does the full Brick City Boiler service lineup include?
The lineup covers emergency repair, installation, replacement, maintenance and tune-ups, radiator repair and installation, thermostat and heating controls, gas boiler services, commercial boiler services, annual safety inspections, and steam boiler work. Each service page explains what the job includes and how it is done. Together they cover nearly every boiler need a Newark home or building can have.
How does a typical service call start?
Every service call starts with diagnostics, so the technician finds the real fault before recommending anything. You then get a written plan that explains the scope of the work, and nothing starts until you approve it. That sequence keeps surprises out of the job and puts the decision in your hands.
Can one company handle both my home boiler and my building boiler?
Yes. Brick City Boiler works on single family homes, two family houses, and larger apartment and commercial buildings. The team services both steam and hot water systems across those building types. One call covers the boiler whether it heats one household or a whole building.
What if I am not sure which service I need?
Describe what the boiler is doing, such as no heat, a leak, a noise, or cold radiators, and the team will point you to the right service. Diagnostics during the visit confirm the fault and the fix. You do not need to diagnose the system yourself before calling.
Do your services cover both repairs and planned upgrades?
Yes. The same team handles urgent repairs, routine maintenance, and planned work such as replacements, new installations, and control upgrades. Planned work follows the same pattern: assessment, a written plan, and approval before work begins. That continuity means the technician who maintains your boiler already knows its history when bigger decisions come up.
Call (973) 275-8278
Serving Newark, NJ now
20
clients today
403
served this month
Call (973) 275-8278 · 24/7 emergency
How may I help?